TROUBLESHOOTING | CURLING

The challenge of curling

In the printing press, the paper‘s surface is moisturised with fountain solution. This one-sided moisturisation can lead to a different surface tension on the paper‘s upper and lower side. The fibre of the paper begins to swell; paper edges may start to furl (curling). This effect can be additionally intensified by means of varnishing. There is an especially high danger of curling using non-coated paper. Uncoated substrates absorb more moisture and hence are more prone to curling.

Solving curling
S​​tep by Step

1. Adjust your fountain solution

Reduce one-sided moisturisation and the effect of different surface tensions.

2. Pay attention to your production conditions

The reason: Climatic influences affect the printing process. Also check the storage of your substrates. Temperature differences between the pile and the production area should be balanced in advance (acclimation).

3. Adapt the surface tension

By means of varnishing the rear page after a one-sided printing, curling can be avoided. It is also possible to send the rear page of your sheets through the printing press with running dumping units.

4. Choose a coating with good anti-curling characteristics

Some coatings have been especially developed for the application on uncoated substrates. Due to their good anti-curling effect, curling is avoided. You achieve a good running behavior during further processing.

Your short checklist

Influence factor: Fountain solution
Measure: Use less fountain solution

Influence factor: Substrate
Measure: Acclimation of substrate

Influence factor: Printing
Measure: Align surface tensions, e.g. by varnishing the rear page

Influence factor: Coating
Measure: Use a suitable alternative

Still have open questions? Contact us and we will support you with the application.

CONTACT US


​​​​​​​Discover the Troubleshooting Series

The Troubleshooting Series is your source of content with smart tips that helps you to make the most of all ACTEGA products in your processes. In addition to state-of-the-art chemical specialties for the packaging industries, we are your knowledge partner by offering you our technical expertise and useful information.

​​​​​​​Discover all of our content

Clear all