TERRAWET^® Playing Card Coating G 9-920 ToySafe-040

Markets

• Publication & Commercial

Application method recommendation

• Sheet-fed offset, coating unit (chambered doctor blade or roller system)
• Wet-in-wet
• Stir well before use! Mechanical stirring is recommended.
• Recommended coating application: 3,5 - 5 g/m²/wet
• The full profile of characteristics of the coating film is available after complete drying.
• Please use printing inks/foil inks suitable for coating.
• Recommended pile temperature: not › 35°C
• A low odour (GA) version is available.
• The coating is principally glueable (please test).
• We recommend to omit adhesive straps.
• In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
• For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
• There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
• Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
• The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
• Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.

Product end use

• Playing Cards

Substrate recommendation

• Coated Board
• Playing card board
• Coated Paper