TERRAWET® Gloss Coating G 9/764 heat resistant-060
Water based gloss coating with a high heat resistance and high rub resistance.
- 涂料
- 水基
Product Details
Markets
- 纸质包装
Application method recommendation
- Recommended pile temperature: not › 35°C
- 如果水性涂料中需要使用防滑粉,必须选用适配性材料(不要使用矿物粉)。
- 涂膜的全部特性在完全干燥后才会显现。
- 建议涂布量:3.5 - 5 g/m²/wet 4 - 6 克/平方米/湿膜
- There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
- Please use printing inks/foil inks suitable for coating.
- We recommend to omit adhesive straps.
- 使用前充分搅拌!建议使用机械搅拌。
- 该涂料适用于 XS 和 MS 箔的包装(无丙烯酸涂层箔)。
- In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
- Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
- For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
- 使用非吸收性基材和/或吸收性较慢的印刷油墨时,我们建议计划好相应的干燥时间。
- Sheet-fed offset, coating unit (chambered doctor blade or roller system)
- 湿碰湿
- 干-湿
Product end use
- 其他非食品
- 间接接触食品
- 干燥食品包装
Substrate recommendation
- 涂层板