TERRAWET Neutral Coating G 9/117-040
very fast drying, high wet block resistance
- Coatings
- Water based
Product Details
Markets
- Paperbased Packaging
- Publication & Commercial
Application method recommendation
- Wet-in-wet
- Sheet-fed offset, coating unit (chambered doctor blade or roller system)
- Sheet-fed offset, coating unit
- The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
- For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
- We recommend to omit adhesive straps.
- There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
- The coating is principally glueable (please test).
- Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
- Please use printing inks/foil inks suitable for coating.
- Stir well before use! Mechanical stirring is recommended.
- Recommended pile temperature: not › 35°C
- Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
- The full profile of characteristics of the coating film is available after complete drying.
- In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
- Recommended coating application: 3,5 - 5 g/m²/wet
Product end use
- 展示
- 其他非食品
- 间接接触食品
- 干燥食品包装
- 宣传手册
Substrate recommendation
- Coated Board
- Coated Paper