WESSCO® LM 27.263.44 UV-Lack Hochglanz
Migrationsarmer UV-Hochglanzlack zur Veredelung von Druckerzeugnissen. Mit Primer-Eigenschaften. Für Flexodruckwerke.
- Beschichtungen/Lacke
- UV-Härtung
Produktdetails
Märkte
- Flexible Verpackung
- Etiketten
Application method recommendation
- Stir well before use! Mechanical stirring is recommended.
- The property profile of the coating film is given in case of a complete curing. The curing depends on the efficiency of lamps, life of UV lamps, machinery speed, general conditions of the UV unit (reflectors, etc.), temperature and the distance from the UV unit to the substrate. We recommend to clean regularly the reflectors and - if necessary - to change the lamps in case of a drop in lamp efficiency.
- A strong absorption on absorbent surfaces can cause an insufficient curing of the UV varnish, sensory problems, mechanical influence as well as rub resistance problems and poor slip properties.
- In case of an offline coating we recommend for the primer a drying time of minimum 24 hours, in case of metallic printing inks minimum 48 hours.
- The printing inks should be suitable for coating. The resistance against alkali, alcohol and solvents should be given in accordance to DIN ISO 2836, former DIN 16524, to exclude any colour change.
- The total structure of substrate/printing ink/varnish must be cured/dried sufficiently before processing and should be checked during the process.
- Glue flaps should be uncoated.
- Do not pollute the varnish with washing water or other varnishes.
- The increase of the slip angle can't be excluded in case of temperature and humidity. Storage tests are necessary.
Product end use
- Druckempfindliche Etiketten
Farben
- Farblos
Substrat-Empfehlung
- Verschiedene Folien und Papiere
Disclaimer
Produktspezifikationen sind im Technischen Datenblatt enthalten. Dieses können Sie je nach Produkt auf der ACTEGA Website herunterladen oder über das Kontaktformular anfragen. Mehr Details finden Sie in unserem Produkt Disclaimer hier .