TERRAWET® Matt Coating G 9/65 dull matt FoodSafe-060
fast drying, very high wet block resistance, for the two-sided coating, FoodSafe certified
- Coatings
- Water based
Product Details
Markets
- Paperbased Packaging
Application method recommendation
- Recommended coating application: 2 - 4 g/m²/wet
- Stir well before use! Mechanical stirring is recommended.
- We recommend to check the viscosity and to adjust it with max. 2 % water if necessary.
- Please use printing inks suitable for coating.
- Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
- There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
- Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
- We recommend to omit adhesive straps.
- Recommended pile temperature: not › 35°C
- In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
- The full profile of characteristics of the coating film is available after complete drying.
- There must be a sufficient hardening of the overall system substrate-printing ink-coating before further processing which shoud be checked in the process.
- For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
- The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
- Sheet-fed offset, coating unit (chambered doctor blade or roller system)
- Wet-in-wet
Product end use
- 直接接触食品
- 间接接触食品
- 干燥食品包装
- 糖果
- 其他非食品
Substrate recommendation
- Coated Paper
- Coated Board
- 背淋PE卡纸