TERRAWET® Gloss Coating G 9/425 FoodSafe-040
for the direct contact with dry/fat-including food, hot foil stampable
- Coatings
- Water based
Product Details
Markets
- Paperbased Packaging
- Publication & Commercial
Application method recommendation
- Gravure Printing
- Wet-on-dry
- Sheet-fed offset, coating unit
- Sheet-fed offset, coating unit (chambered doctor blade or roller system)
- Wet-in-wet
- Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
- For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
- Not suitable for the two-sided coating.
- There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
- Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
- In order to guarantee a fast and complete drying, we recommend a sufficient airing of the sheets.
- Viscosity for processing in gravure printing: 15 - 20 sec. (dilution with water : ethanol - 3 : 1)
- Please use printing inks/foil inks suitable for coating.
- Stir well before use! Mechanical stirring is recommended.
- We recommend to omit adhesive straps.
- The full profile of characteristics of the coating film is available after complete drying.
- Recommended pile temperature: not › 35°C
- The coating is principally glueable (please test).
- Recommended coating application: 3,5 - 5 g/m²/wet
- The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
Product end use
- Displays
- Food direct
- Other non-food
- Food indirect
- Personal Care
- Pharma
- Sweets
- Dry foodstuff packagings
- Brochures
Substrate recommendation
- Coated Board
- Coated Paper
Disclaimer
As especificações do produto estão contidas na folha de dados técnicos. Dependendo do produto, é possível fazer o download no site da ACTEGA ou solicitá-lo usando o formulário de contato. Para obter mais detalhes, consulte nosso aviso de isenção de responsabilidade sobre o produto aqui .