TERRAWET® Gloss Coating G 9/703-040

glossy, fast drying, good wet block resistance, good scuff resistance

  • Coatings
  • Water based
联系我们

Product Details

Markets

  • Paperbased Packaging
  • Publication & Commercial
  • Labels
  • Flexible Packaging

Application method recommendation

  • Sheet-fed offset, coating unit
  • Sheet-fed offset, coating unit (chambered doctor blade or roller system)
  • Wet-in-wet
  • We recommend to omit adhesive straps.
  • Recommended coating application: 3,5 - 5 g/m²/wet
  • Recommended pile temperature: not › 35°C
  • Resistance against alkali, alcohol and solvents should be given according to DIN ISO 2836, formerly DIN 16524, in order to exclude a change of colour.
  • The coating is principally glueable (please test).
  • The full profile of characteristics of the coating film is available after complete drying.
  • Using non-absorbent substrates and / or slowly absorbent printing inks, we recommend to plan for the corresponding drying times.
  • The coating is suitable for wrapping in foils XS and MS (no acrylic coated foil).
  • Please use printing inks/foil inks suitable for coating.
  • For the further processing of the sheets under mechanical load and/or the influence of humidity, a sufficient high basic consistency of the substrate is required.
  • There must be a suitability for water-based coating if anti-set-off powder is used (do not use mineral powder).
  • Stir well before use! Mechanical stirring is recommended.

Product end use

  • 展示
  • 其他非食品
  • 间接接触食品
  • 干燥食品包装
  • 宣传手册
  • 饮料

Substrate recommendation

  • Coated Board
  • Coated Paper

Disclaimer

产品规格包含在技术数据表中。根据产品的不同,您可以从 ACTEGA 网站下载或通过联系表格索取。更多详情, 请参阅我们的产品免责声明