WESSCO 17.527.01 UV Coating High Gloss

Markets

• Labels
• Paperbased Packaging
• Publication & Commercial

Application method recommendation

• Stir well before use !
• Dépose vernis récommandée : 3 - 6 g/m²/humide
• The property profile of the coating film is given in case of a complete curing. The curing depends on the efficiency of lamps, life of UV lamps, machinery speed, general conditions of the UV unit (reflectors, etc.), temperature and the distance from the UV unit to the substrate. We recommend to clean regularly the reflectors and - if necessary - to change the lamps in case of a drop in lamp efficiency.
• A strong absorption on absorbent surfaces can cause an insufficient curing of the UV varnish, sensory problems, mechanical influence as well as rub resistance problems and poor slip properties.
• In case of an offline coating we recommend for the primer a drying time of minimum 24 hours, in case of metallic printing inks minimum 48 hours.
• The printing inks should be suitable for coating. The resistance against alkali, alcohol and solvents should be given in accordance to DIN ISO 2836, former DIN 16524, to exclude any colour change.
• Le complexe support/encre/vernis doit avoir atteint une stabilité suffisante avant la transformation
• Glue flaps should be uncoated.
• Do not pollute the varnish with washing water or other varnishes.
• The increase of the slip angle can't be excluded in case of temperature and humidity. Storage tests are necessary.
• Offset feuilles, groupe vernis (chambre à racle ou deux rouleaux)

Product end use

• Pressure Sensitive Labels
• Cosmétique
• Autres non-alimentaires
• Personal Care

Color

• transparent

Substrate recommendation

• Coated Paper
• Coated Board
• Plastics